Top

What electrical work requires a permit in Wichita?

In Wichita and Sedgwick County, you need an electrical permit from MABCD for new installations, service upgrades, electrical panel replacements, major circuit additions, generator installations, utility service connection work, electric meter base replacements, and any work involving modifications to your home's electrical system. MABCD requires permits to ensure work meets the National Electrical Code and local building codes, and inspections verify the installation is safe before you energize it. The permit process protects you by creating a record of the work and ensuring a qualified inspec

Do you install smoke alarms, carbon monoxide detectors, and fire alarm systems?

Yes, smoke alarms, carbon monoxide detectors, and fire alarm systems are core home safety measures we install and inspect throughout Wichita. Under NFPA 72, smoke alarms are required in every bedroom, outside each sleeping area, and on every level of your home. Carbon monoxide detectors must be installed within 15 feet of sleeping areas. We install hardwired smoke alarms with battery backup, which continue working during a power outage, unlike battery-only units that people often forget to replace. In older Wichita homes, we regularly find smoke alarms from the 1990s well past their 10-year re

Do you install ceiling fans in Wichita homes?

Yes, we install ceiling fans throughout Wichita and Sedgwick County. Ceiling fan installations require a fan-rated electrical box supporting the weight and continuous motion of the fan. A standard light fixture box is not rated for a ceiling fan and will loosen over time as the fan operates, creating a safety hazard. Many Wichita homes have light fixtures in rooms where you want ceiling fans, but the existing box is only rated for a stationary fixture. We assess your existing wiring and box, install a properly rated fan box, run new wiring if the location has no existing circuit, and install a

How does EV charger installation work in Wichita?

EV charger installation starts with assessing your electrical panel capacity to determine if you need a 200-amp upgrade or if your current panel handles the load. We then run a dedicated 240-volt circuit, typically 40 to 50 amps depending on your charger, from your panel to the installation location, usually in your garage or on an exterior wall near your driveway. The installation must comply with NEC Article 625, which covers electric vehicle charging equipment, and requires a permit from MABCD. We handle the permit application, perform the installation, which typically takes four to eight h

Why do my circuit breakers keep tripping?

Circuit breakers trip to protect your home from electrical overloads, short circuits, ground faults, or failing breakers. If a breaker trips once and resets without issue, it did its job. If breakers trip repeatedly, you have a problem needing professional attention. Common causes include too many devices on one circuit, a faulty appliance creating a short circuit, faulty wiring with damaged insulation, a ground fault from moisture or deteriorated wire insulation, or a breaker reaching the end of its service life. Problems with ground circuits, such as missing or broken grounding conductors, a

How much does an electrical panel upgrade cost in Wichita, KS?

The cost of an electrical panel upgrade depends on several factors: the size of the new panel (most upgrades go from 100 amps to 200 amps), the condition of your existing wiring, whether your electric meter base needs replacement, the complexity of the service entrance, and permit and inspection fees from MABCD. Homes needing significant rewiring or utility service connection work cost more than straightforward panel swaps. The distance from your panel to the meter and the condition of the service entrance conductors also affect labor and material costs. While we provide upfront flat-rate pric

How long does an electrical panel upgrade take?

The physical installation of a new electrical panel typically takes four to eight hours for a straightforward upgrade, depending on the complexity of your electrical system and the number of circuits being transferred. Your power will be off during the installation, usually for four to six hours, so plan accordingly by clearing perishables from your refrigerator if needed and arranging backup power for medical devices if necessary. The full timeline includes permit processing through MABCD before we start work, which takes a few business days, and a final inspection after installation before E

Do your Wichita electricians handle lighting installation?

We install and replace lighting fixtures of all types, from landscape lighting to complete recessed lighting services for kitchens, hallways, and living spaces. Recessed lighting requires careful planning: spacing, trim style, insulation contact rating, and circuit load all affect the final result. A proper lighting design considers the function of each space, the existing circuit capacity, and the placement of controls such as dimmers and occupancy sensors. We also install LED retrofit kits in existing light fixtures, outdoor and landscape lighting, under-cabinet lighting, and accent lighting